Forum Navigation
Post History: riley1234198
Just noticed on the website that sales wont be back till sales will reopen 1 May 2023? When i ordere …In: MG2 to MG3
2 years ago
Thanks for the reply i also use a LX4 board and notice with the MG2 if i do a vector in engrave the …In: MG2 to MG3
2 years ago
Yeah the PMW wire looked like it was seated but it wasnt seems to be working now
In: Laser dont shut off
2 years ago
Just hooked up my rotary using lightburn and setting it up drew a 10x10mm sq its cutting from the ce …In: Laser dont shut off
2 years ago
3 years ago
3 years ago
Was wondering if there is a setting to turn off the laser? Mine is still engraving where it shouldn’ …In: Laser not turning off
3 years ago
Im having a issue where i start to engrave and it will stop in the middle of the jobs what would be …In: Stops Engraving
3 years ago
So what are the $103=160 (a:stp/mm) and $104=160.000 (a:stp/mm) setting for in the config file?In: default mini settings
4 years ago
Ever since i switch over the the mini girbil board i can not run over 100 mm/s i had no problems wit …In: jerking
4 years ago
I did what you suggested i took all wiring apart checked the crimps re-crimped a few wires now its w …In: Laser not shutting off on moves
4 years ago
Having a problem with my laser not shutting off between white scan when doing a vector engrave. I wi …In: Laser not shutting off on moves
4 years ago
Is there anything in the config to tweak to get the engraving speeds faster? The board has been work …In: Speed
4 years ago
Seen that someone ask this already but only one person answered but no one said if he got it to work …In: LaserGRBL
4 years ago
The board does work great just played around with black tile painted white today.In: Just a few more painted tile
5 years ago
Just playing around with my K40 when i get a few minutes, the machine is very capable of making qual …In: Few things i have done
5 years ago
Sorry to ask so many questions but does the laser panel on the K40 have to be set to a certain perce …In: Board is intalled but not firing
5 years ago
5 years ago
So what plug is the water safty supposed to plug in PG or KK i read on another forum people said the …In: Board is intalled but not firing
5 years ago
Ok will check it out, i was thinking it could be that water safety shut off? I also read on the for …In: Board is intalled but not firing
5 years ago
Ok got the board installed everything seems to work it homes, i can jog the axis but not firing i di …In: Board is intalled but not firing
5 years ago
5 years ago
Is there a driver to install for the mini gerbil? If so i cant seem to find a link to download it?In: Drivers
5 years ago
Ok i been reading a few of the threads in the forum now be for i get rid of the white wire make with …In: PMW wire
5 years ago
5 years ago
Ok got the wires you sent now i only need one right? I have a male/female wire and a female/female w …In: PMW wire
5 years ago
So back to the PMW wire that middle wire i will have to get rid of and replace it with the one you a …In: PMW wire
5 years ago
Here is a pic of the wiring of my power supply nothing is really color coded 24V DC, GND, 5V DCIn: PMW wire
5 years ago
5 years ago
So the easiest why to connect would to cut the middle wire and solder the PMW wire to it?In: PMW wire
5 years ago
5 years ago