Forum Navigation
Post History: Rommel1787
Is it possible to run a sperate power supply to the min gerbil?
If so any instructions …In: Power supply
3 years ago
has anyone done this?
the distuption to my laser is when i either turn on my lights or if i switc …In: check door alarm?
3 years ago
Quote from Paul DeGroot on June 8, 2020, 9:35 am
Hi,
Some power supplies are noisy a …In: check door alarm?
3 years ago
Hi
I have been cutting fine on my laser for months and today I was working on a project and the l …In: check door alarm?
3 years ago
Hi
My $28 is 2000 at the moment but it is set it LB to 2000.
I have changed the $28 …In: poor quality engraving
4 years ago
HI
Im realllly struggling to get good images engraved. ive wasted so much wood trying. …In: poor quality engraving
4 years ago
thanks appreciate that. Darkness isn't the issue on the replacement controller.
its as the eng …In: error 8 lightburn
4 years ago
Quote from Paul DeGroot on May 16, 2019, 10:56 am
Hi David, Did you receive the replacement board? …In: error 8 lightburn
4 years ago
I thought i got mine working by switching to the 5v via usb but it cut off again today.
Paul ment …In: error 8 lightburn
4 years ago
Just an update guys. I did ask Paul asked and i managed to get it to engrave.
Although the qualit …In: error 8 lightburn
4 years ago
Quote from snow on May 7, 2019, 1:19 am
Yea im having the same issue.
My M2Nano board works with …In: error 8 lightburn
4 years ago
Quote from Lars on March 9, 2019, 3:45 am
hey Paul
i had help from a friend, he is an ingeneur w …In: error 8 lightburn
4 years ago
Hey
i have the exact same issue. My old controller works fine too.
Did you get this resolved?In: error 8 lightburn
4 years ago
Remove the old gerbil and installed the new one and my engraves stop randomly giving me error 8.
…In: New mini gerbil Error 8?
4 years ago
This is why im requesting a way to re upload the firmware.
https://youtu.be/dTqZv4GFawkIn: Gerbil Controller flash?
4 years ago
Hi My controller for some reason is now saying i have grbl 1.1.e?
How can i update it t …In: Gerbil Controller flash?
4 years ago
this one exact same image processed with the same script but set to grey scale:
makes no sense bu …In: Latest mini gerbil print
4 years ago
i used this script the other month and got bad results.
Using passthrough the image was terrible …In: Latest mini gerbil print
4 years ago
Sure.
grey Scale on LB.
300 dpi 30mm/s 17% power on MDF.
still working on fine tuning but h …In: something else i made
5 years ago
5 years ago
Another one.
Any tips on image processing? i use lphoto shop for editing the images. i feel like …In: something i made
5 years ago
Quote from Paul DeGroot on January 18, 2019, 9:27 am
Boards are arriving on the week of the 20th Ja …In: New kid on the block: Mini Gerbil
5 years ago
5 years ago
I did check and allign the $30 with LB. I used to use laserweb and the setup process is almost the s …In: Greyscale imaging
5 years ago
thak you for the detailed explanation it has helped me try and dial my setting in more. Especially t …In: Greyscale imaging
5 years ago
Quote from davegalesr on January 12, 2019, 9:07 am
I use gimp for some of the pre-processing - it&# …In: Greyscale imaging
5 years ago
reduced my power and change $30 settings. Not sure what i think to the image now 😛
What image pr …In: Greyscale imaging
5 years ago
Quote from Gabriel on December 31, 2018, 1:12 pm
Hi,
look at you min power an max power settings …In: Greyscale imaging
5 years ago
Quote from Gabriel on December 31, 2018, 1:12 pm
Hi,
look at you min power an max power settings …In: Greyscale imaging
5 years ago