EDIT YOUR PROFILE HERE

Forum breadcrumbs - You are here:ForumPost History: Dan
Please or Register to create posts and topics.

Post History: Dan

Daniel Collins
Hi Scott, thanks for your post. There's various blogs on our website that note different las …In: Big change in raster detail...
3 years ago
Hi Christakis could you please email the file you are using to awesometechaus (at) gmail.com  ? …In: error egraving
3 years ago
Hi Tom, thanks for the clear write-up - makes it much easier to help. I'm assuming you wo …In: Homing Stops at Y Limit
3 years ago
Hi Michael, yes, the laser switch is still functional when Mini Gerbil is installed according to …In: Mini-Gerbil in K40: Laserswitch still functional?
3 years ago
Thanks Ben, that's ideal you've been able to test with a known good unit.  I've conta …In: K40 freezes half way
3 years ago
Hi Paulo. If your power supply is the same as either of the ones shown at https://awesome.tech/in …In: Mini Gerbil with FSL hobby laser 5th Generation
3 years ago
Thanks Ben. The biggest issue I can see is the 4 pin power plug.  The metal sockets are visibly p …In: K40 freezes half way
3 years ago
Thanks Ben. From your results in home position and not in home position: <Alarm|MPos:3.000, …In: K40 freezes half way
3 years ago
Not turning off while travelling is still the same issue - I think there is a poor connection somewh …In: Laser not turning off while traveling
4 years ago
If the problem is coming and going randomly then it's unlikely to be caused (or fixed) by softw …In: Laser not turning off while traveling
4 years ago
Hi, thanks for the photo.  From the top I can't see if the your K40's plug is secure - …In: Laser not turning off while traveling
4 years ago

Forum Registration

EDIT YOUR PROFILE HERE