Forum Navigation
Post History: wvarga
Hooked up a new power supply last month that I was never able to get working. During my testing I h …In: Mini Gerbil issues after sparking/new psu
4 years ago
I wanted to share a few pictures of my completed Catan board with you guys. I haven't had time …In: Catan Board
5 years ago
Showing off my K40 as it is
Shotty work but cut out the exhaust manifold and stuck the 6 inch duc …In: K40 Large Window
5 years ago
Also to clarify for others, the ground wire I mention in the post above was from the pins with PWM c …In: Help with settings
5 years ago
Fixed it after corresponding with Dan via email:
Hey Dan thank you so much for helping me …In: Help with settings
5 years ago
Hey Paul/Everyone, hope its ok I add on to this thread with a new problem, which may be the settings …In: Help with settings
5 years ago
Thanks for your quick reply Paul! Fixed it!
I confirmed it was grounded and also repla …In: Help with settings
5 years ago
Hey Paul
I got a couple things I still am trying to smooth out. The laser turns on as it is maki …In: Help with settings
5 years ago
Fixed it! Turns out the y axis limit switch had a loose connection, but seems to be all good now. S …In: Help with settings
5 years ago