Forum Navigation
Post History: BAD LUCK LEATHER
Quote from FillDeeUK on August 28, 2019, 1:12 am
@bad-luck-leather,
Did you ever get this issue …In: Still getting noise/dots
5 years ago
I suspect the same. I would like to be able to use the full range of frequencies. I did put a resist …In: Still getting noise/dots
5 years ago
The problem is with the $28 setting . The default setting of 0 is giving me this problem. 5 and 6 do …In: Still getting noise/dots
5 years ago
I previously thought thought this was due to a dirty image. I recreated the image and created new ve …In: Still getting noise/dots
5 years ago
I was able to get my test fire button working in laserweb. No switches added, no change in wiring.
…In: Test fire working!
5 years ago
5 years ago
As dumb as I feel I found the issue. Upon zooming all the way in on the image, changing my computer& …In: Random dots
5 years ago
Creating a macro to get the laser to fire using "check size" function
Create a Macro I …In: Laserweb
5 years ago
Why can't I update the machine profile in laserweb? It does not allow me to select the update b …In: Laserweb
5 years ago
I also worked up a macro to use in conjunction with the outline button so the laser will fire and tr …In: Laserweb
5 years ago
Paul,
The image is a few years old I can't remember if I received it as a jpeg or not. I …In: Random dots
5 years ago
HI'm getting random dots on my raster images. So far it's just this image as far as I can …In: Random dots
5 years ago
The issue turned out to be the green jumper not in the correct postition. SOLVEDIn: Installed board now what?
5 years ago
FYI $10 should be 0 for LaserWeb!
A value of 3 is not anymore valid since Grbl 1.0.
If you w …In: Laserweb
5 years ago
I was able to remedy this. Now I cannot turn the laser off in laserweb when pausing or stopping. I h …In: Installed board now what?
5 years ago
I have installed the board into my k40 and the laser powers up. Ive tried using K40 Whisperer and La …In: Installed board now what?
5 years ago
6 years ago