Forum Navigation
Post History: vincent76
Hello,
thanks for your help 😉 i installed these macro and now i can unblock and
block the laser …In: error code 9 (end stop)
4 years ago
good-morning Paul,
now everything works perfectly and it is really more pleasant to work with
thi …In: error code 9 (end stop)
4 years ago
Hello,
that's it i think i have found the cause of all these problems.
by looking again for …In: error code 9 (end stop)
4 years ago
my grbl settings for position are "$ 3 = 1 $ 23 = 3".
when I switch on the machine the ca …In: error code 9 (end stop)
4 years ago
good-morning Paul,
I tried to move the jumper so that the card is powered by USB but that does
no …In: error code 9 (end stop)
4 years ago
Thanks for your help 😉
I already tried to change the position of the sensor without result.
I w …In: error code 9 (end stop)
4 years ago
Hi,
I just found a start of a track. a friend told me that he had also
encountered problems with …In: error code 9 (end stop)
4 years ago
when I start the machine the carriage comes in the top left and the X axis
continues to force seve …In: error code 9 (end stop)
4 years ago
good-morning Paul,
I have a version with ribbon and opto sensors.
the sensor probably works becau …In: error code 9 (end stop)
4 years ago