Forum Navigation
error code 9 (end stop)
#16 · February 12, 2020, 10:56 am
Hi Vincent, Glad it worked out. It can be challenging to figure out what is happening especially remote without all the visual details.
Let's us know how it goes over time. Cheers, Paul and Dan
Cheers,
Paul
awesome.tech
#17 · February 17, 2020, 4:51 am
good-morning Paul,
now everything works perfectly and it is really more pleasant to work with
this card and lightburn. the only problem that I meet and to which I did
not find a solution is to unlock the motors to place my laser head manually.
I turn on the machine the motors block and remain blocked when I launch
lightburn and even the $ X command does not unblock them. well it's not a
big deal I move my head with the arrows.
#18 · February 17, 2020, 11:35 am
I don't recall where I found this but it's useful for unlocking and locking the motors for manual positioning. Be sure to Lock it back after you've Unlocked it. You can create a couple macro's in Lightburn similar to these.
(Lock Gantry)
$1=255
G91
G0 x0.1
G0 x-0.1
G90
(Unlock Gantry)
$1=125
G91
G0 x0.1
G0 x-0.1
G90
#19 · February 18, 2020, 2:22 am
Hello,
thanks for your help ;-) i installed these macro and now i can unblock and
block the laser head as i want it is perfect!
Vincent.
dancolwp1974 has reacted to this post.
dancolwp1974