EDIT YOUR PROFILE HERE

Forum breadcrumbs - You are here:ForumPost History: Milos Pejakovic
Please or Register to create posts and topics.

Post History: Milos Pejakovic

Milos Pejakovic
part 2In: Help with installation 5v wire problem
1 year ago
Hi Dan so can you please elaborate this: when i make connection as you showed i make 5v but lose 24v …In: Help with installation 5v wire problem
1 year ago
this is side picture of second powersupply. it seems i dont understand anything. even my father who …In: Help with installation 5v wire problem
1 year ago
Hello Dan, so first of all pic no.1 is black probe that i forgot to show you. no.2 pic show second …In: Help with installation 5v wire problem
1 year ago
Hello Dan so i was talking with one of the electricians and he told me what i can do to connect 5v f …In: Help with installation 5v wire problem
1 year ago
Hello Dan, i understand that i need Molex connector but question is from should i take 5v so it will …In: Help with installation 5v wire problem
1 year ago
Hello, so im new to this and i dont have any experience with wires. Just few days ago i got my MG3 a …In: Help with installation 5v wire problem
1 year ago
Hi Dan actualy no i have no one to ask. so im in the dark here trying to understand what should i do …In: Help with installation
1 year ago
I was thinking to strip down my old psu cables from pc and take 1 wire. They bring power as well so …In: Help with installation
1 year ago
so i was wandering can i just connect 5v coming from power supply and go directly to the molex on th …In: Help with installation
1 year ago
Hi Dan, Thanks for all the help. Do I need a specific wire that I can connect for 5V or can I …In: Help with installation
1 year ago
hello, 1.3.01 lightburn i have Chinese inport no name 400mm x 400mm well its the same when i push …In: Help with installation
1 year ago
let me add that laser is working fine on k40 wisper with nano boardIn: Help with installation
1 year ago
even like so its not moving same error  In: Help with installation
1 year ago
here is the picture of controllerIn: Help with installation
1 year ago
i didnt change any of the settings ``Do you see any movement of the gantry at all? `` actually no …In: Help with installation
1 year ago
hello i just got MG3 and im getting this error. after close inspection of cables im still geting the …In: Help with installation
1 year ago
Quote from Paul on December 1, 2022, 8:55 am Hi Milos, thanks for reaching out to us. The PSU is no …In: Help with installation
1 year ago
Hello first off all let me say im new to this. And would be more than happy if someone could help me …In: Help with installation
1 year ago

Forum Registration

EDIT YOUR PROFILE HERE