PWM Connector
My PSU us different from what's on your latest connection video for mini-gerbil. I'm not sure which pin it needs to be connected to,but here's images.
Any assistance would be appreciated.
I'm post pic when I get home Out on a date right now.
Doing some research and it would appear to be the same pin as in the others, but had to be sure, first. Second pin from the right on the second block from the right. In other words the IN pin between G and 5V.
Correct me if I'm wrong, please.
Hi Brian, yes that's correct. The silkscreen identifies as G, IN and 5V. The pwm wire goes to the middle pin called IN. The G stands for ground and is already connected via the Ground on the power connector.
Note: You could install a shielded PWM cable and than you have to connect the shield of that cable to the G connection in order to make the shield work. So far we had no issues with single wires and no signs of electrical noise on the PWM wire. I guess when you install the controller far away of the PSU then you probably will need such an arrangement.
Thanks for confirming.