Forum Navigation
Post History: Hegemone
So that appears to be it. With $28=5, $30=1000 it works just like it used to. 100% cut in LightBurn …In: Settings Within Lightbrun
4 years ago
I will definitely look at those. I should have posed the device settings screen from lightburn as we …In: Settings Within Lightbrun
4 years ago
To confirm the red "I" wire" from the power supply goes directly to the pwr post on t …In: Settings Within Lightbrun
4 years ago
Thanks for the response. I guess I should try removing the grbl an other wire from the pot connectio …In: Settings Within Lightbrun
4 years ago
Thanks for the response. It's not that I want to use the POT, I just used it to test that he la …In: Settings Within Lightbrun
4 years ago
Ok. So GRBL is setup correctly and the laser is firing correctly. Variable power is working but it i …In: Settings Within Lightbrun
4 years ago
So I had this all working somehow last year but had to move to a new computer and reinstall lightbur …In: Settings Within Lightbrun
4 years ago
Ok well I swapped the stepper drivers and I am getting a bit more movement on the Y. In one directio …In: It will home but Y will not move
6 years ago