K40 and CNC new products: Mini Gerbil and Super Gerbil controllers



Accounts

Free Trial

Projects

Projects

SSL

Storage

Domains

Sub-domains

Sub-domains

Sub-domains

Sub-domains

Sub-domains

Sub-domains

Mini Gerbil - Laser

 $86 
from 
USD

$79/€69

FREE SHIPPING World Wide!

Mini Gerbil G-Code Controller

Suitable for K40 and other basic laser cutters / engravers

Full simultaneous 2 Axis - X and Y

Assemble your own case from flatpack

Holds large G-code files with 96kB fast FLASH/RAM memory

2 x A4988 standard step sticks included (1.5A)

-

Easy connection to standard K40 connectors

Uses USB communication

-

Programmer port

Free access to Mini Gerbil Firmware updates for the life of the product

Community Support - K40 Forum

ON-SALE!

Starter Super Gerbil CNC

USD$140


or €123

FREE SHIPPING World Wide!

Super Gerbil G-Code Controller

SUitable for both advanced laser cutters/engravers and basic CNC machines. The third axis allows a laser cutter to raise /lower material for deep and accurate laser cutting or as rotary attachment

Full simultaneous 3 Axis

No case supplied

Holds large G-code files with 96kB fast FLASH/RAM memory

3 x A4988 standard step sticks included (1.5A)

-

-

USB cable

-

Programmer port

Free access to Super Gerbil Firmware updates for the life of the product

Bronze Community Forum support

PRE-ORDER!

Maker Super Gerbil CNC

USD$225

or €199

FREE SHIPPING World Wide!

Super Gerbil G-Code Controller

Suitable for wide range of CNC machines including 3 cartesian and one rotary axis

Full simultaneous 4 Axis

Assemble your own case from flatpack plus 24V fan

Holds large G-code files with 96kB fast FLASH/RAM memory

4 x TB67S109 high power step sticks included (4A)

Drive brushed DC spindle motors up to 150W via onboard module

-

USB cable

-

Programmer port

Free access to Super Gerbil Firmware updates for the life of the product

Silver - Expect 2-4 days turnaround. Support for 6 months

PRE-ORDER!

Innovator Super Gerbil CNC

USD$295

or €260

FREE SHIPPING World Wide!


Super Gerbil G-Code Controller

Suitable for pro users needing 5 axis for complex contours and the convenience of phone/tablet control

Full simultaneous 5 Axis

Pre-assembled acryllic case with 24V fan

Holds large G-code files with 96kB fast FLASH/RAM memory

5 x TB67S109 high power step sticks included (4A)

Drive high power brushed DC spindle motorsup to 750W via onboard module

Wire harness to allow for fast and easy connection to stepper motors and limit switches

USB cable or BlueTooth

BlueTooth module for real-time wireless monitoring and control

USB ST-Link V2 programmer for updating to latest firmware

Free access to Super Gerbil Firmware updates for the life of the product

Gold - Expect us to get back to you in under 48 hours. Support for 12 months

PRE-ORDER!
1. Mini Gerbil – The Pocket Rocket for K40 laser (drop in replacement for NanoM2 boards)

Now in stock !

The Mini Gerbil is our latest replacement Controller for the standard K40 Nano M2 board.  It’s fast, small, easy to connect and affordable.

You can run it without additional costly power supplies, and it’s neatly packed in a custom acrylic case.

Ready for plugging into the K40 laser
K40 laser controller ‘Mini Gerbil’ in case

The firmware is based on the ARM firmware of the Super Gerbil but just for two axis but runs 7 x faster on the 72 MHz 32 bits ARM processor than on our previous Gerbil.

Take engraving to the next level with 16 bit PWM shaded grays.  Of course you can still engrave dithered images if you want to.  Mini Gerbil’s dimensions are approx. 80 x 50 x 22 mm. And detailed specifications can be found here.  Software supported includes Inkscape, Easel, laserWeb, LightBurn etc.

2. Super Gerbil – The Multi Axis CNC G-Code controller

Lead time is approximately March – mid May (after we supplied our Kickstarter Backers)

This new product serves our CNC customers. They wanted a controller that could run up to 5 axis simultaneously with additional features. Now it has never been easier to migrate from legacy solutions (PCs running Mach3 with parallel port) to embedded controllers. Full flexibility! We added breakout ports for external stepper drivers or spindle controllers.  You can extend any Super Gerbil product to 5 axis by just putting drivers in their sockets. However if you don’t have drivers, no problems, just select from the various package deals we have!

The Super Gerbil CNC controller
The Super Gerbil CNC controller

The Super Gerbil has PWM spindle soft start, ATC, MOSFET ports, PWM composite ports, Bluetooth, STv2Link USB programmer to update the Open Source firmware , Optional opto coupler breakout provided for DC brushed motor driver sockets (2 choices) for your Spindle and optional Bluetooth module.

Spindle driver options
Spindle drivers options

Two spindle DC brushed motor driver options (Pololu)

Super Gerbil’s dimensions are 170 x 100 x 15 mm. Detailed specifications can be found here <link>

You can track deliver here: DHL tracking link

Check your PayPal delivery address prior to complete the payment!

4 thoughts on “K40 and CNC new products: Mini Gerbil and Super Gerbil controllers”

Comments are closed.