[Solved] Mini not working
Quote from jfinstrom on January 28, 2020, 9:23 amI have an email in but there is a bit of a timezone offset so I want to see if anyone here has any insight.
I can't jog the y axis and the x axis just vibrates. Swapped the driver boards and no change
https://drive.google.com/folderview?id=1C8Tc4AMHNfx5EzOrZ3qXvBJe0FXY2DzZ
On their request I sent a video of lights and the x axis and the lights on the board. Also a few pictures of the wiring.
Solved through email
Looks like the pots were set wrong, likely during my troubleshooting
I have an email in but there is a bit of a timezone offset so I want to see if anyone here has any insight.
I can't jog the y axis and the x axis just vibrates. Swapped the driver boards and no change
https://drive.google.com/folderview?id=1C8Tc4AMHNfx5EzOrZ3qXvBJe0FXY2DzZ
On their request I sent a video of lights and the x axis and the lights on the board. Also a few pictures of the wiring.
Solved through email
Looks like the pots were set wrong, likely during my troubleshooting