Forum Navigation
Lightburn Min 10% power
#1 · March 11, 2019, 5:07 pm
I am playing around doing a test grid for speed and settings.
When I set the laser to anything less than 10% I don't get anything Which surprises me as 10% is still rather brown.
#2 · June 11, 2019, 5:25 pm
You probably have the set the power settings in LaserWeb (S parm) to correspond with those in the firmware ($30). E,g, $30=2000 then S=2000. (I believe S = 1 as default in Laserweb)
Cheers,
Paul
awesome.tech