Quote from
Paul on June 16, 2019, 8:20 am
Some people get the issue where the machine homes correctly but Y moves in the wrong direction or the opposite.
This can be easily fixed and there is a very good write up here: https://github.com/LightBurnSoftware/Documentation/blob/master/CommonGrblSetups.md
For example:
Homes correctly but Y is inverted: Change from $3=1 (X inverted) to $3=3 (X and Y inverted direction). However... Y is now travelling correctly but Homing is incorrect! Set the homing direction parm $23 from $23=3 to $23=1.
Some people get the issue where the machine homes correctly but Y moves in the wrong direction or the opposite.
This can be easily fixed and there is a very good write up here: https://github.com/LightBurnSoftware/Documentation/blob/master/CommonGrblSetups.md
For example:
Homes correctly but Y is inverted: Change from $3=1 (X inverted) to $3=3 (X and Y inverted direction). However... Y is now travelling correctly but Homing is incorrect! Set the homing direction parm $23 from $23=3 to $23=1.
Cheers,
Paul
awesome.tech