Quote from
Paul on August 12, 2020, 12:13 pm
Hi, yes you can wire two y axis motors in parallel. However the stock k40 power supply probably can't source the required motor current. So wire up an external power supply. Ensure the DC minus is wired to the common minus of the k40 power supply (gnd).
Hi, yes you can wire two y axis motors in parallel. However the stock k40 power supply probably can't source the required motor current. So wire up an external power supply. Ensure the DC minus is wired to the common minus of the k40 power supply (gnd).
Cheers,
Paul
awesome.tech