16mm LED button and On/Off switches
Has any one installed/modded their K40 to use the bellow switches to replace the stock Laser On and Test Fire switches? I'm trying to figure out how to properly wire them so the LED comes on when the switches are on and turn off when the switches are off.
Thanks in advance!
16mm Stainless Steel Latching Push button Switch 12V-24V Power Symbol LED 1NO1NC SPDT ON Off Waterproof Toggle Switch with Wire Socket Plug (Blue LED)
https://www.amazon.com/gp/product/B07NY4YX7D/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
16mm Momentary Push Button Switch On Off Stainless Steel with 12V LED Angel Eye Head for 16 0.63" Mounting Hole with Wire Socket Plug Self-reset (Yellow)
https://www.amazon.com/gp/product/B07DZC9C13/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
Just wondering... were you able to figure this out? I'm trying to do the same thing and I'm having a hard time finding information on how to separately wire the LED with DC voltage and power the outlets on the back of the K40 with AC voltage so the LED lights up when power is sent to the outlets.
Doesn't sound like your really doing the same thing as Jason as he was attempting to wire DC switches for DC circuits (Laser on & Test Fire). Your asking about wiring switches for the 110V AC for the outlets.
I installed a 220V LED switch to control my external air assist on my panel and here's how they were wired. You cant wire low voltage DC switches with 110V AC or you'll most likely melt / short the switch so make sure you have the right kind of switch for the circuit your using. These are the switches I used, https://www.ebay.com/itm/Push-Button-Switch-Ring-LED-Light-Momentary-Latching-Waterproof-16mm-12V-24V-220/372365538269?ssPageName=STRK%3AMEBIDX%3AIT&var=641183565582&_trksid=p2060353.m2749.l2649
Uploaded files:
I don't know if you've figured this out or not but this is what I am using. It's a slightly larger switch but would probably be wired the same.
Uploaded files: