Mini Gerbil debugging – no response
Return to MG3 debugging
| Symptom Detail | Likely causes and their solutions (in recommended sequence) |
| LED 1 – Green – USB Power is not illuminated | USB Power problem: the USB connector is not supplying 5V (and ground) to the Mini Gerbil. Replace USB cable or check with another PC/Laptop. Mini Gerbil is dead. Contact Awesome.Tech |
| LED 7 – Green – 24V not illuminated | Laser Power problem: the large connector is not supplying 24V (and ground) to the Mini Gerbil. Check the connection between MG3 and the K40 power supply. Check the power supply |
| LED 8 – Green – 5V not illuminated | Laser Power problem: the large connector is not supplying 5V (and ground) to the Mini Gerbil. Check the connection between MG3 and K40 power supply. Check the power supply |
Return to MG3 debugging