Mini Gerbil Acrylic Case

This blog is about the Mini Gerbil acrylic case. You asked for it, so here it is ! You can use and modify to meet your own needs.

Assembly Instructions

The design is simple and just a slot and click mechanism for the case. The PCB is held in place by 4 stand offs (M3 x 6 mm). Mount the PCB first for easy access to the nuts and bolts. The short slot should be at the top of the case for a tight fit.

The vector file can be down loaded here:

We use Inkscape for our vector image editing.

Happy cutting !

Leave a Reply