Now in stock.
Note these products are upgrade kits, with instructions and community support to help with the installation.
Please double-check your Paypal delivery address prior to payment!
Photo: The propack kit
[supsystic-price-table id=12]
Note: when in doubt – Confidence Quiz before buying
Customers comments:
Dwayne Myers:
“Been having a blast with the K40 and your board. Amazing tech / design. I can now laser cut ply with just a slight tanning of the wood, no char what so ever. Your supplied laser lens (different focal length than stock), upgrade of an air assist, running on a Raspberry Pi 3 with LaserWeb server and LaserWeb 4 on my MacBook Pro or the Mac mini in my shop and this thing can do anything.
Thank you so much. Feel free to share this and I hope things are going well for you guys.
Dwayne
BTW, the lens that was supplied required an adapter ring to center it in the Air Assist head. I ended up 3D Printing an ABS adapter ring with a tight fit between the aluminium ring and the lens. Working great and the lens does not appear to get hot and affect the contact with the plastic.”
Instructions and downloads:
Inkscape Plugins can be downloaded from here:
Gerbil Plugins
1 file(s) 71kB
The instructions for configuring Gerbil’s firmware can be found here: Gerbil’s config
Setting up Links:
- Installing the K40 controller
- ProPack reward components installation
- K40 engraving calibration instructions
- Quality engraving review
- Manufacturing an Arduino R4
Making:
Background info:
- What makes this solution so great for the K40?
- The Story of the cheap Chinese K40 eBay laser cutter/engraver
[yop_poll id=”2″]