Quality engraving review







Engraving review

K40 with Moshidraw engraving

These engravings were done by someone else since I never got Moshidraw engraving to work on my machine and I really don’t want to reinstall the troublesome winseal, Moshidraw and the NanoM2 controller to find out that it does not work again. So, I can’t tell if these engravings are the best that can be achieved. Unfortunately I have not been able to find any better examples to compare with so I go with these as a representative sample of Moshidraw. Also those engrave speeds are Moshidraw speeds and I can’t tell if these are in mm/s but let’s assume they are unless you can tell.

 Grbl R4

These are the results with engraving with Inkscape and the Grbl firmware on the Arduino R4 controller. The speed is 1400mm/min which equates to 23mm/s. Not fast but can be explained by the laser tube characteristics. High power allows faster engraving but makes the beam wider and you lose the fine details. Also further ionisation of the gas takes time so the tube isn’t as responsive as say a laser solid state LED diode. As you see the results are pretty impressive!

17 thoughts on “Quality engraving review”

  1. I do not even know how I finished up here, but I assumed this publish used to be good. I do not recognize who you might be however certainly you are going to a famous blogger if you aren’t already. Cheers!

  2. Thanks on your marvelous posting! I really enjoyed reading it, you are a great author. I will always bookmark your blog and will often come back down the road. I want to encourage you to continue your great writing, have a nice afternoon!

  3. I know this site offers quality depending posts and additional data, is there any other web site which gives these kinds of stuff in quality?

  4. Have you ever considered creating an e-book or guest authoring on other sites? I have a blog based on the same ideas you discuss and would really like to have you share some stories/information. I know my subscribers would enjoy your work. If you’re even remotely interested, feel free to shoot me an email.

  5. I enjoy what you guys are up too. Such clever work and exposure! Keep up the good works guys I’ve incorporated you guys to our blogroll.

  6. Valuable info. Fortunate me I found your site unintentionally, and I am stunned why this coincidence did not came about earlier! I bookmarked it.

  7. My brother suggested I might like this blog. He was once totally right. This post actually made my day. You cann’t believe simply how much time I had spent for this information! Thanks!

  8. Hi! I’ve been following your site for a long time now and finally got the courage to go ahead and give you a shout out from New Caney Texas! Just wanted to tell you keep up the excellent job!

  9. Wow that was unusual. I just wrote an really long comment but after I clicked submit my comment didn’t appear. Grrrr… well I’m not writing all that over again. Anyway, just wanted to say superb blog!

    1. Replies are not immediately live because of the huge amounts of spam. We normally tend to read the comments and approve them in one day. Thanks for reading my blog and your encouragement!

  10. Hello, i think that i saw you visited my site so i came to “return the favor”.I am attempting to find things to enhance my website!I suppose its ok to use some of your ideas!!

  11. Its like you read my mind! You seem to know a lot about this, like you wrote the book in it or something. I think that you can do with a few pics to drive the message home a bit, but other than that, this is excellent blog. A fantastic read. I’ll definitely be back.

  12. When I originally commented I clicked the “Notify me when new comments are added” checkbox and now each time a comment is added I get three emails with the same comment. Is there any way you can remove me from that service? Thanks a lot!

    1. Hi, I deeply apologize for this. From experience I know how annoying this is. I corrected a few spelling mistakes and the site thinks it’s new content and sends you a notification. Yeah, I am still jetlagged from the US trip, I really messes with me?

Leave a Reply to online education programs Cancel reply